############# Example Script ##########################
# to run PTStitcher
#
#
# Only lines starting with 'p','o', i', or 'm' are read,
# so you can add comments and info as you like by using
# other line starting characters.
# The * character at the first of a line indicated the end of the script file.
# The stitcher script must contain:
# one 'p'- line describing the output image (eg Panorama)
# one 'o'-line for each input image
# one 'i' line for each input image that is optional
# the 'm'-line is optional and allows you to specify modes for the optimization.
# the 'C'-line is optional and allows morphing of control points.
# 'p'-line options
# w1000 width in pixels
# h600 height in pixels (default: width/2)
# f0 projection format,
# 0 - rectilinear (for printing and viewing)
# 1 - Cylindrical (for Printing and QTVR)
# 2 - Equirectangular ( for Spherical panos), default
# 3 - full-frame fisheye
# v360 horizontal field of view of panorama (default 360)
# nPICT Panorama file format, one of:
# PICT pict-file on macs, bmp-file on win (default)
# PSD single layer Photoshop file, 48bits supported
# PNG png-format, 48bits supported
# TIFF tiff-format, 48bits supported
# PSD_mask Photoshop file, one image per layer
# + shape mask & feathered clip mask at overlap center
# PSD_nomask Photoshop file, one image per layer,
# TIFF_mask tiff-format, multi-file, one image per file, 48bit supported
# alpha layer with feathered clip mask at overlap center
# TIFF_m tiff-format, multi-file, one image per file, 48bit supported
# alpha layer with non-feathered clip mask at image border
# + shape mask & non-feathered clip mask at image border
# JPEG Panoramic image in jpeg-format. Use with f1
# for IBM Hotmedia panoramas.
# PAN SmoothMove movie. Use only with f2.
# IVR LivePicture IVR movie
# cylindrical (format f1) or spherical (format f2)
# IVR_java LivePicture Java Panorama,
# cylindrical (format f1) or spherical (format f2)
# VRML VRML background node, use only with f2 for panoramas, or
# VRML-object for PTStereo
# QTVR Apple QTVR-panomovie. Use only with f1
# 3DMF 3DMF-object (PTStereo).
#
# n"QTVR w400 h300 c1" additional viewer options in a quoted string together with format
# the following options are recognized:
# w(width) and h(height) of viewer window (only QTVR on Macs)
# c(codec: 0-JPEG, 1-Cinepak, 2-Sorenson) (only QTVR on Macs)
# q(codec quality):
# 0-high,1-normal,2-low QTVR on Macs
# 0-100(highest) on other jpeg-formats (PAN, IVR, IVR_java, VRML)
# g progressive jpeg (0-no, 1-yes) (PAN, IVR, IVR_java, VRML)
# Optimized JPEG (0-on(default), 2-disabled), (3-progressive with optimized disabled)
# p initial pan angle ( QTVR on Macs, VRML, IVR)
# v field of view (QTVR, VRML, IVR)
# Many more options can be set by editing the viewer scripts
# u10 width of feather for stitching all images. default:10
# k1 attempt color & brightness correction using image number as anchor
# b1 attempt brightness correction with no color change using image number as anchor
# d1 attempt color correction with no brightness change using image number as anchor
# Do not use more than one of k, d, b.This is new method of correcting
p w800 nPSD_mask
# The 'i' lines describe input images and is optional
# nName file name of the input image.
# over ridable with command line parameters to PTStitcher
i n"photo1.jpg"
# The 'o' lines describe input images. One line per image is required
# The width and height of the image is obtained from image
# f0 projection format,
# 0 - rectilinear (normal lenses)
# 1 - Panoramic (Scanning cameras like Noblex)
# 2 - Circular fisheye
# 3 - full-frame fisheye
# 4 - PSphere, equirectangular
# v82 horizontal field of view of image (required)
# y0 yaw angle (required)
# p43 pitch angle (required)
# r0 roll angle (required)
# a,b,c lens correction coefficients (optional)
# (see http://www.fh-furtwangen.de/~dersch/barrel/barrel.html)
# d,e initial lens offset in pixels(defaults d0 e0, optional).
# Used to correct for offset from center of image
# d - horizontal offset,
# e - vertical offset
# g,t initial lens shear. Use to remove slight misalignment
# of the line scanner relative to the film transport
# g - horizontal shear
# t - vertical shear
# +buf (obsolete, -buf and +buf are now ignored when stitching)
# load and merge image with buffer
# -buf (obsolete, -buf and +buf are now ignored when stitching)
# save result to buffer. The first 'o' line should
# contain one '-buf' command, the last line one '+buf'
# command, and all other lines both '+buf -buf'
# Exception: remove all 'buf' commands when
# creating Photoshop-files to preserve the original images.
# u10 (obsolete, globally used on p line) width of feather for stitching. default:10
# S100,600,100,800 Selection(l,r,t,b), Only pixels inside the rectangle will be used for conversion.
# Original image size is used for all image parameters
# (e.g. field-of-view) refer to the original image.
# Selection can be outside image dimension.
# C100,600,100,800 Crop(l,r,t,b), Only pixels inside the rectangle will be used for conversion.
# Cropped image size is used for all image parameters
# (e.g. field-of-view) refer to the cropped part of the image.
# m20 (obsolete, use S & C) ignore a frame 20 pixels wide. default: 0
# mx100 (obsolete, use S & C) crop to brightest rectangle with size 100x200;
# my200 (obsolete, use S & C) used only for circular fisheye images (f2)
# s0 (obsolete, ignored, always blend) specify placement of seam between buffer and image:
# 0-middle of overlap('blend' ,default)
# 1- at edge of image ('paste').
# o (the small letter). Morph-to-fit using control points.
# k0 (obsolete, use p line correction still used with plugin)
# attempt color/brightness correction when merging image and buffer, one of:
# 0 - no correction(default);
# 1 - change image;
# 2 - change buffer;
# 3 - change both
# this feature does not work very well!
o f2 r0 p0 y0 v183 a0 b-0.1 c0 S100,600,100,800
o f2 r0 p0 y180 v183 a0 b-0.1 c0 S100,600,100,800
# 'm'-line options
# ----------------
# Set mode for stitcher, not required
#
# g2.5 Set gamma value for internal computations (default 1.0)
# See <http://www.fh-furtwangen.de/~dersch/gamma/gamma.html>
# i2 Set interpolator, See <http://www.fh-furtwangen.de/~dersch/interpolator/interpolator.html>
# one of:
# 0 - poly3 (default)
# 1 - spline16,
# 2 - spline36,
# 3 - sinc256,
# 4 - spline64,
# 5 - bilinear,
# 6 - nearest neighbor,
# 7 - sinc1024
# \/ antialiasing filters \/ See <http://www.pano2qtvr.com/dll_patch/>
# 8 - Box
# 9 - Bartlett/Triangle
# 10 - Hermite
# 11 - Hanning
# 12 - Hamming
# 13 - Blackmann
# 14 - Gaussian 1/sqrt(2)
# 15 - Gaussian 1/2
# 16 - Quadardic
# 17 - Cubic
# 18 - Catmull-Rom
# 19 - Mitchell
# 20 - Lanczos2
# 21 - Lanczos3
# 22 - Blackman/Bessel
# 23 - Blackman/sinc
#
# f0 Invoke Faster Transformation also invoked by creating a file named "pano12_opt.txt"
# in the same foler as project with a line FAST_TRANSFORM
m g1.5 i6 f0
#
# 'z'-lines options
# ----------------
# Extended Depth-Of-Field, not required
#
# Automatically determine, for every point in a picture, which of mumerous overlapping
# images has best focus. Masks are generated to reveale the best focused parts of
# each image. Feathering must be selected. Used with PSD_mask or TIFF_mask file format
# to edit the mask or with flattened file formats for flattened final result. Does not
# work if color and/or brightness correction are invoked.
#
# m2 mask type
# m0 hard-edged masks, mutually exclusive
# m1 hard-edged masks, stack of nested masks
# m2 blended masks, stack of nested masks (default & strongly recommended)
# (this option includes a smoothing computation that seems to help a lot.)
# fN focus estimation window size, N = halfwidth of window.
# Recommended value is 0.5% of image width, e.g. 4 pixels for an 800-pixel image.
# Computation cost for focus estimation increases proportional to N^2. Default f4.
# sN smoothing window size, N = halfwidth of window.
# Recommended value is 0.5% of image width, e.g. 4 pixels for an 800-pixel image.
# Computation cost for smoothing increases proportional to N^2. Default s4.
z m2 f4 s4
#
# 'C' lines
# ----------------
# Morphing of control point lines
# One line per point
# Created automatically by optimizer
#
# i0 image
# x363.726 starting x point position
# y125.738 starting y point position
# X363.838 morphed x point position
# Y125.618 morphed y point position
C i0 x363.726 y125.738 X363.838 Y125.618
*
Every thing after * is ignored.
來自:http://photocreations.ca/panotools/stitch.txt
posted on 2010-09-21 15:19
noBugnoGain 閱讀(689)
評論(0) 編輯 收藏 引用 所屬分類:
圖像處理