国产一区二区三区久久,久久99精品免费一区二区,欧美精品久久久久久久自慰

讓VC助手在外部文件變化時自動parse

我們的工程使用notepad++掛載protobuf的protoc代碼生成器, 每次生成后, 助手都要手動parse一次, 很麻煩. 研究了下VC助手的選項, 按下圖配置即可靜默刷新文件

posted @ 2013-11-13 10:39 戰魂小筑閱讀(1662) | 評論 (1) | 編輯收藏

OpenGL混合的在線模擬器, 等了10年的工具…

http://www.andersriggelsen.dk/glblendfunc.php

即便是老外的教科書也是晦澀的,不如幾行js來的爽快

posted @ 2013-11-12 13:58 戰魂小筑閱讀(1890) | 評論 (0) | 編輯收藏

VC工程的命令行編譯法

我使用的是VS2010, 老版本的未測

call "c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat"
cd 你的工程sln目錄

MSBuild “你的工程.sln” /t:Build /p:Configuration=Release /maxcpucount:4

解釋: 首先調用VC上下文建立批處理, 轉到你的sln目錄,保證工作目錄正確, /maxcpucount是并行編譯, 根據你的需求配置即可

posted @ 2013-11-05 15:20 戰魂小筑閱讀(2611) | 評論 (1) | 編輯收藏

使用HG(Mercurial)做分布式代碼管理的一些經驗

距離第一次使用HG已經由2,3年了。從第一次將HG用于自己的項目，用U盤同步代碼. 到現在將HG應用于linux, 版本差異發布, 項目內部多人的分布式開發，已經感覺非常熟練。

我們的項目的客戶端和服務器均由C++開發，由于HG設計的理念是1個工程對應1個庫，因此我們的客戶端和服務器是分開的兩個HG代碼庫。這種思想和SVN管理的代碼有很大不同。SVN時代的游戲工程大多是這樣安排目錄的：

common <-客戶端和服務器共享的庫

client<-客戶端的代碼

server<-服務器的代碼

通過SVN強大的權限控制給不同的前后端賦予權限，前后端程序將獲得不同的目錄組合。SVN下的這種工程組織方法能很好的解決單一語言跨工程的代碼，協議共享問題。雖然現在各種Erlang，Java的服務器語言與as3,lua的不同客戶端腳本語言混雜的時代已經無所謂這種老式設計思想。但是對于我們純C++的手游來說，還是必須面對分布式代碼管理工具下的代碼跨庫共享問題。

我就這個問題與多年前被我推薦過HG的朋友討論起來，他們也存在我們這個問題，但是他們的解決方法就是每個工程一個庫。然后被我問到：“同步一次代碼，一次次的打開不同的庫（他們客戶端+服務器一共6到7個HG代碼庫），進行同步，完成后，還要反向pull，不累啊？”，朋友回答：“習慣就好”

隨后，我也翻查了git對多項目的支持。得到的答案也是跟HG一樣的，這類分布式代碼管理工具本身的設計理念只有賬號，而無權限，本身就是基于開源代碼精神設計的工具，如果分了權限，豈不是違背開源精神（這是我想的）。因此如果想管理多個項目代碼，要么多庫，要么合庫。

posted @ 2013-10-25 22:51 戰魂小筑閱讀(2642) | 評論 (2) | 編輯收藏

luabind 0.9.1在boost 1.49+和gcc-4.6.3以上版本的編譯問題處理

將boost更新到1.53時, 發現luabind死活編譯不過, 報錯如下

error: missing binary operator before token "("

根據老外的描述, boost中的BOOST_PP_ITERATION_FLAGS從1.49版本后發生了一些變化.

在git找到一個patch, 鏈接在此

以下簡單描述

修改call_function.hpp, call_member.hpp及wrapper_base.hpp

去掉#elif BOOST_PP_ITERATION_FLAGS() == 1

更換為

#else

#if BOOST_PP_ITERATION_FLAGS() == 1

然后在源碼底部加一個#endif即可

posted @ 2013-09-24 16:46 戰魂小筑閱讀(2340) | 評論 (0) | 編輯收藏

Qt應用程序使用圖形解碼無法顯示的問題

最近發現一個Qt寫的切圖軟件, 導入PNG圖片可以顯示, 而JPEG圖片無法顯示. 開發機正常. Google了一下, 發現Qt通過外部插件機制支持各種擴展功能.

在啟動前, 添加如下代碼:

QApplication qapp(argc, argv);

qapp.addLibraryPath(QCoreApplication::applicationDirPath()+"/plugins");

將QT開發目錄下: Qt\4.8.2\plugins\拷貝到Qt的exe目錄即可

posted @ 2013-08-10 09:44 戰魂小筑閱讀(780) | 評論 (0) | 編輯收藏

Cygwin環境下使用Android NDK r8e編譯boost 1.53

這里不能不說Google確實搜了1天都沒解決問題, baidu第一個就解決了...

cygwin參考這里

http://my.oschina.net/tonywolf/blog/49214

簡單的說

1.下載cygwin的網絡安裝包(第一次安裝只能這樣)

2. 選擇靠前一點的網站進行下載( 下好的包可以留著, 下次安裝直接從文件夾中選擇就可以安裝)

cygwin下使用NDK編譯boost參考這里

http://blog.sina.com.cn/s/blog_a6946c8a01016aot.html

細節注意:

1. boost官網下載boost_1_53_0.tar.bz2, 解壓放在android-ndk-r8e/sources下

2. 生成boost編譯工具: 在boost目錄下運行 ./bootstrap.sh 或者 bootstrap.bat 生成 b2

3. 修改 boost/tools/build/v2/user-config.jam 內容修改如下

import os ;

if [ os.name ] = CYGWIN || [ os.name ] = NT {

androidPlatform = windows ;

else if [ os.name ] = LINUX {

androidPlatform = linux-x86_64 ;

else if [ os.name ] = MACOSX {

androidPlatform = darwin-x86 ;

modules.poke : NO_BZIP2 : 1 ;

ANDROID_NDK = ../.. ;

using gcc : android4.6 : $(ANDROID_NDK)/toolchains/arm-linux-androideabi-4.6/prebuilt/$(androidPlatform)/bin/arm-linux-androideabi-g++ :

<archiver>$(ANDROID_NDK)/toolchains/arm-linux-androideabi-4.6/prebuilt/$(androidPlatform)/bin/arm-linux-androideabi-ar

<ranlib>$(ANDROID_NDK)/toolchains/arm-linux-androideabi-4.6/prebuilt/$(androidPlatform)/bin/arm-linux-androideabi-ranlib

<compileflags>--sysroot=$(ANDROID_NDK)/platforms/android-9/arch-arm

<compileflags>-I$(ANDROID_NDK)/sources/cxx-stl/gnu-libstdc++/4.6/include

<compileflags>-I$(ANDROID_NDK)/sources/cxx-stl/gnu-libstdc++/4.6/libs/armeabi/include

<compileflags>-DNDEBUG

<compileflags>-D__GLIBC__

<compileflags>-DBOOST_FILESYSTEM_VERSION=3

<compileflags>-lstdc++

<compileflags>-lgnustl_shared

<compileflags>-mthumb

<compileflags>-fno-strict-aliasing

<compileflags>-std=gnu++11

<compileflags>-O2

4. 為了安全起見, 我打了個BoostForAndriod上的補丁: 手動修改下就好了

diff -ruN boost_1_53_0-boot/boost/asio/detail/socket_types.hpp boost_1_53_0-patched/boost/asio/detail/socket_types.hpp

--- boost_1_53_0-boot/boost/asio/detail/socket_types.hpp     2012-01-15 14:46:25.000000000 +0100

+++ boost_1_53_0-patched/boost/asio/detail/socket_types.hpp     2012-06-27 19:19:01.279562338 +0200

@@ -123,7 +123,12 @@

typedef int socket_type;

const int invalid_socket = -1;

const int socket_error_retval = -1;

+// @Moss - Some platforms do not define it (Android)

+#if defined(INET_ADDRSTRLEN)

const int max_addr_v4_str_len = INET_ADDRSTRLEN;

+#else // defined(INET_ADDRSTRLEN)

+const int max_addr_v4_str_len = 16;

+#endif // defined(INET_ADDRSTRLEN)

#if defined(INET6_ADDRSTRLEN)

const int max_addr_v6_str_len = INET6_ADDRSTRLEN + 1 + IF_NAMESIZE;

#else // defined(INET6_ADDRSTRLEN)

diff -ruN boost_1_53_0-boot/boost/asio/ip/impl/address_v6.ipp boost_1_53_0-patched/boost/asio/ip/impl/address_v6.ipp

--- boost_1_53_0-boot/boost/asio/ip/impl/address_v6.ipp     2012-01-15 14:46:25.000000000 +0100

+++ boost_1_53_0-patched/boost/asio/ip/impl/address_v6.ipp     2012-06-27 19:19:11.029581297 +0200

@@ -11,6 +11,23 @@

#ifndef BOOST_ASIO_IP_IMPL_ADDRESS_V6_IPP

#define BOOST_ASIO_IP_IMPL_ADDRESS_V6_IPP

+// @Moss - Define IPv6 macros

+#if !defined(IN6_IS_ADDR_MULTICAST)

+#define IN6_IS_ADDR_MULTICAST(a) (((__const uint8_t *) (a))[0] == 0xff)

+#endif

+#if !defined(IN6_IS_ADDR_MC_NODELOCAL)

+#define IN6_IS_ADDR_MC_NODELOCAL(a) \

+        (IN6_IS_ADDR_MULTICAST(a) \

+         && ((((__const uint8_t *) (a))[1] & 0xf) == 0x1))

+#endif

+#if !defined(IN6_IS_ADDR_MC_GLOBAL)

+#define IN6_IS_ADDR_MC_GLOBAL(a) \

+        (IN6_IS_ADDR_MULTICAST(a) \

+         && ((((__const uint8_t *) (a))[1] & 0xf) == 0xe))

+#endif

#if defined(_MSC_VER) && (_MSC_VER >= 1200)

# pragma once

#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)

diff -ruN boost_1_53_0-boot/boost/config/user.hpp boost_1_53_0-patched/boost/config/user.hpp

--- boost_1_53_0-boot/boost/config/user.hpp     2004-01-10 13:10:00.000000000 +0100

+++ boost_1_53_0-patched/boost/config/user.hpp     2012-06-27 19:18:46.129532736 +0200

@@ -13,6 +13,15 @@

//  configuration policy:

//

+// Android defines

+#define __arm__ 1

+#define _REENTRANT 1

+#define _GLIBCXX__PTHREADS 1

+// There is problem with std::atomic on android (and some other platforms).

+// See this link for more info:

+// https://code.google.com/p/android/issues/detail?id=42735#makechanges

+#define BOOST_ASIO_DISABLE_STD_ATOMIC 1

// define this to locate a compiler config file:

// #define BOOST_COMPILER_CONFIG <myheader>

diff -ruN boost_1_53_0-boot/boost/detail/endian.hpp boost_1_53_0-patched/boost/detail/endian.hpp

--- boost_1_53_0-boot/boost/detail/endian.hpp     2011-03-29 23:58:48.000000000 +0200

+++ boost_1_53_0-patched/boost/detail/endian.hpp     2012-06-27 19:18:39.359519453 +0200

@@ -31,7 +31,7 @@

// GNU libc offers the helpful header <endian.h> which defines

// __BYTE_ORDER

-#if defined (__GLIBC__)

+#if defined (__GLIBC__) || defined(ANDROID)

# include <endian.h>

# if (__BYTE_ORDER == __LITTLE_ENDIAN)

#  define BOOST_LITTLE_ENDIAN

diff -ruN boost_1_53_0-boot/boost/interprocess/detail/workaround.hpp boost_1_53_0-patched/boost/interprocess/detail/workaround.hpp

--- boost_1_53_0-boot/boost/interprocess/detail/workaround.hpp     2011-12-26 18:21:36.000000000 +0100

+++ boost_1_53_0-patched/boost/interprocess/detail/workaround.hpp     2012-06-27 19:18:52.909546004 +0200

@@ -54,7 +54,7 @@

    #endif

    //Check for XSI shared memory objects. They are available in nearly all UNIX platforms

-   #if !defined(__QNXNTO__)

+   #if !defined(__QNXNTO__) && !defined(ANDROID)

       #define BOOST_INTERPROCESS_XSI_SHARED_MEMORY_OBJECTS

    #endif

diff -ruN boost_1_53_0-boot/libs/filesystem/src/operations.cpp boost_1_53_0-patched/libs/filesystem/src/operations.cpp

--- boost_1_53_0-boot/libs/filesystem/src/operations.cpp     2012-01-28 15:40:16.000000000 +0100

+++ boost_1_53_0-patched/libs/filesystem/src/operations.cpp     2012-06-27 19:19:19.269597266 +0200

@@ -73,13 +73,15 @@

     const fs::path dot_dot_path("..");

#   include <sys/types.h>

#   include <sys/stat.h>

-#   if !defined(__APPLE__) && !defined(__OpenBSD__)

+#   if !defined(__APPLE__) && !defined(__OpenBSD__) && !defined(__ANDROID__) && !defined(ANDROID)

#     include <sys/statvfs.h>

#     define BOOST_STATVFS statvfs

#     define BOOST_STATVFS_F_FRSIZE vfs.f_frsize

#   else

#     ifdef __OpenBSD__

#     include <sys/param.h>

+#     elif defined(__ANDROID__) || defined(ANDROID) // @Moss - Android messes up a bit with some headers, this one is the correct one :D

+#     include <sys/vfs.h>

#     endif

#     include <sys/mount.h>

#     define BOOST_STATVFS statfs

@@ -206,7 +208,19 @@

          || ::mkdir(to.c_str(),from_stat.st_mode)!= 0))

#   define BOOST_COPY_FILE(F,T,FailIfExistsBool)copy_file_api(F, T, FailIfExistsBool)

#   define BOOST_MOVE_FILE(OLD,NEW)(::rename(OLD, NEW)== 0)

+#if defined(__ANDROID__) || defined(ANDROID)

+    int BOOST_RESIZE_FILE(const char *path, off_t size)

+    {

+      int result = -1;

+      int fd = open(path, O_WRONLY);

+      if (fd != -1)

+        result = ftruncate(fd, size);

+      close(fd);

+      return result;

+    }

+#else

#   define BOOST_RESIZE_FILE(P,SZ)(::truncate(P, SZ)== 0)

+#endif

#   define BOOST_ERROR_NOT_SUPPORTED ENOSYS

#   define BOOST_ERROR_ALREADY_EXISTS EEXIST

5. 命令行編譯:

./b2 --without-python --without-mpi --without-serialization toolset=gcc-android4.6 link=static runtime-link=static target-os=linux --stagedir=android

使用編譯完成的boost庫

1. 將編譯boost_1_53_0\android\lib\ 下的.a庫及boost_1_53_0\boost\下的頭文件拷貝出來放在工程的boost4android目錄下

2. 在boost4android目錄下,創建Android.mk, 內容如下

LOCAL_PATH:= $(call my-dir)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_atomic

LOCAL_SRC_FILES:= lib/libboost_atomic.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_chrono

LOCAL_SRC_FILES:= lib/libboost_chrono.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_context

LOCAL_SRC_FILES:= lib/libboost_context.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_date_time

LOCAL_SRC_FILES:= lib/libboost_date_time.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_exception

LOCAL_SRC_FILES:= lib/libboost_exception.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_filesystem

LOCAL_SRC_FILES:= lib/libboost_filesystem.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_graph

LOCAL_SRC_FILES:= lib/libboost_graph.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_iostreams

LOCAL_SRC_FILES:= lib/libboost_iostreams.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_c99

LOCAL_SRC_FILES:= lib/libboost_math_c99.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_c99f

LOCAL_SRC_FILES:= lib/libboost_math_c99f.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_c99l

LOCAL_SRC_FILES:= lib/libboost_math_c99l.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_tr1

LOCAL_SRC_FILES:= lib/libboost_math_tr1.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_tr1f

LOCAL_SRC_FILES:= lib/libboost_math_tr1f.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_math_tr1l

LOCAL_SRC_FILES:= lib/libboost_math_tr1l.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_program_options

LOCAL_SRC_FILES:= lib/libboost_program_options.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_random

LOCAL_SRC_FILES:= lib/libboost_random.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_regex

LOCAL_SRC_FILES:= lib/libboost_regex.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_system

LOCAL_SRC_FILES:= lib/libboost_system.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_thread

LOCAL_SRC_FILES:= lib/libboost_thread.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

include $(CLEAR_VARS)

LOCAL_MODULE:= boost_timer

LOCAL_SRC_FILES:= lib/libboost_timer.a

LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)

include $(PREBUILT_STATIC_LIBRARY)

可以根據自己的需要調整以上包含

3. 在應用程序的Android.mk中添加

LOCAL_WHOLE_STATIC_LIBRARIES += boost_system
LOCAL_WHOLE_STATIC_LIBRARIES += boost_filesystem
LOCAL_WHOLE_STATIC_LIBRARIES += boost_thread

用多少, 包多少

添加異常支持 LOCAL_CPPFLAGS += –fexceptions

添加模塊引用

$(call import-module,boost4android)

posted @ 2013-07-20 16:23 戰魂小筑閱讀(3537) | 評論 (2) | 編輯收藏

Google Protocolbuf 文本格式的解析

protobuf就是為懶人而造的工具, 啥協議, 啥配置文件, 統統定義proto, 解析就ok, 非常方便

文本格式的解析錯誤不能使用捕獲錯誤來獲取, 因此,我們需要使用自定義的錯誤收集器進行收集, 看代碼:

#include <google/protobuf/text_format.h>

#include <google/protobuf/io/zero_copy_stream_impl_lite.h>

#include <google/protobuf/io/tokenizer.h>

class PBTextErrorCollector : public google::protobuf::io::ErrorCollector

public:

    PBTextErrorCollector( const std::string& FileName )

        : mFileName( FileName )

    virtual void AddError(int line, int column, const string& message)

        CCLog("%s(%d:%d) %s ", mFileName.c_str(), line, column, message.c_str() );

    virtual void AddWarning(int line, int column, const string& message)

        CCLog("%s(%d:%d) %s ", mFileName.c_str(), line, column, message.c_str() );

private:

    std::string mFileName;

};

解析代碼

google::protobuf::TextFormat::Parser P;

    P.RecordErrorsTo( &PEC );

    P.Parse( &AIS, &AF );

另外: 文本格式的注釋使用unix shell風格: 以#開頭

下面是我的文本格式的配置文件

AnchorPointX: 0.5
AnchorPointY: 0

SpriteScale: 2

ComponentName: "ActorActionManager"
ComponentName: "ActorFrameEventDispatcher"
#ComponentName: "SoundFXController"
ComponentName: "RoleDeltaMoveController"
ComponentName: "RoleBehaviorDirector"

InitAction: AA_Idle

Animations 
{
  AnimationName: "mai_idle"
  AnimationInterval: 0.067
}