1 /**
2 2005.10.13 scott
3 1. GetCommunity()完成對象分配回收
4
5
6 */
7
8
9 #ifdef WIN32
10 #pragma warning(disable:4786)
11 #endif
12
13 #include "flowvis.h"
14 #include "util.h"
15 #include "mrtg.h"
16 #include <stdio.h>
17 #include <stdlib.h>
18 #include <math.h>
19 #include "encrypt.h"
20
21
22
23 MrtgInfo FlowVis::MRTG ;
24
25
26
27 FlowVis::FlowVis(){
28
29 }
30
31 FlowVis::~FlowVis(){
32 }
33
34 bool FlowVis::ReloadConfig(){
35 char buff[1024];
36 _sconf.Lock();
37 SetMRTGInfo();
38 //-- run time params set
39 if( get_conf_val("ENABLE",buff,sizeof(buff))){
40 _sconf.rtParam.enable = (int) atoi(ValidString(buff).c_str());
41 }
42
43 if( get_conf_val("ALARM_VALUE",buff,sizeof(buff))){
44 _sconf.rtParam.alarm_val = (int) atoi(ValidString(buff).c_str());
45 }
46
47 if( get_conf_val("LINK_SENSITIVE",buff,sizeof(buff))){
48 _sconf.rtParam.link_sensitive = (int) atoi(ValidString(buff).c_str());
49 }
50 MainLog(NVLog::LOG_DEBUG,"靈敏度:%d",_sconf.rtParam.link_sensitive);
51 if( get_conf_val("SHOW_TYPE",buff,sizeof(buff))){
52 _sconf.rtParam.show_type = (int) atoi(ValidString(buff).c_str());
53 }
54
55 // --
56 if( get_conf_val("DEBUG_HOST",buff,sizeof(buff))){
57 _sconf.debug_host = ValidString(buff);
58 }
59 if( get_conf_val("DEBUG_PORT",buff,sizeof(buff))){
60 _sconf.debug_port = (unsigned short)atoi(ValidString(buff).c_str());
61 }
62 if( get_conf_val("LOG_LEVEL",buff,sizeof(buff))){
63 _sconf.log_level = (unsigned int)atoi(ValidString(buff).c_str());
64 }
65 if( get_conf_val("USERLOG_PORT",buff,sizeof(buff))){
66 _sconf.userlog_port = (unsigned int)atoi(ValidString(buff).c_str());
67 }
68 if( get_conf_val("JAVA_APP",buff,sizeof(buff))){
69 MRTG.java = ValidString(buff);
70 }
71 if( get_conf_val("PERL_APP",buff,sizeof(buff))){
72 MRTG.perl = ValidString(buff);
73 }
74 if( get_conf_val("SHOWLINK_INTERVAL",buff,sizeof(buff))){
75 _sconf.showlink_interval = (unsigned int)atoi(ValidString(buff).c_str());
76 }
77 if( get_conf_val("UNCHECK_LICENSE",buff,sizeof(buff))){
78 _sconf.check_license = false;
79 }
80 if( get_conf_val("LOGWIN_STARTUP_SHOW",buff,sizeof(buff))){
81 _sconf.logwin_startup_show = true;
82 }
83 _sconf.Unlock();
84 return true;
85 }
86
87 bool FlowVis::Initial(const char * confile){
88 int ret;
89 chdir(GetExeFileDir().c_str());
90 #ifdef WIN32
91 WORD wVersionRequested;
92 WSADATA wsaData;
93 int err;
94 wVersionRequested = MAKEWORD( 2,2 );
95 err = WSAStartup( wVersionRequested, &wsaData );
96 if ( err != 0 ) {
97 return false;
98 }
99 #endif
100
101 #ifdef FLOWVIS_SHOW
102 NVLog::RegFileWriter * fw = new NVLog::RegFileWriter("./show.log");
103 #else
104 NVLog::RegFileWriter * fw = new NVLog::RegFileWriter("./order.log");
105 #endif
106 fw->Open();
107 _log.SetWriter(fw);
108
109
110 //-- 加載配置文件
111 if( !ReloadConfig() ){
112 MainLog(NVLog::LOG_ERROR,"reload config failed!");
113 return false;
114 }
115
116
117 if( _sconf.check_license ){
118 std::string msg="";
119 bool show;
120
121 if(!GetLicensNumber(msg,show)){
122 #ifdef FLOWVIS_ORDER
123 // printf("\nget license failed ,%s",msg.c_str());
124 PopMessage(MSG_WARNING,msg.c_str());
125 MainLog(NVLog::LOG_ERROR,msg.c_str());
126
127 #endif
128 return false;
129 }else{
130 if( show ){
131 #ifdef FLOWVIS_ORDER
132 // printf(msg.c_str());
133 PopMessage(MSG_INFORMATION,msg.c_str());
134 MainLog(NVLog::LOG_MESSAGE,msg.c_str());
135 #endif
136 }
137 //printf("check license ok");
138 }
139 }
140
141
142
143
144 //-- license check end
145 if( !CheckEnvironment() ){
146 MainLog(NVLog::LOG_ERROR,"檢測系統運行環境條件失敗");
147 return false;
148 }
149 #ifdef WIN32
150 NVLog::WindowWriter * ww = new NVLog::WindowWriter("flowvis");
151 ww->Open();
152 _log.SetWriter(ww);
153 //-- for userlog
154 _userlog.SetFormat("<TIME>\t<MESSAGE>\n");
155 NVLog::WindowWriter * wwul = new NVLog::WindowWriter(USERLOG_WIN_TITLE,true);
156 wwul->Open();
157 _userlog.SetWriter(wwul);
158 #endif
159
160 #ifdef _UNIX
161 //-- for userlog
162 _userlog.SetFormat("<TIME>\t<MESSAGE>\n");
163
164 #ifdef FLOWVIS_SHOW
165 NVLog::UdpWriter *uw = new NVLog::UdpWriter(_sconf.debug_host.c_str(),_sconf.debug_port);
166 #else
167 NVLog::UdpWriter *uw = new NVLog::UdpWriter(_sconf.debug_host.c_str(),_sconf.debug_port+1);
168 #endif
169 uw->Open();
170 _log.SetWriter(uw);
171
172 #ifdef FLOWVIS_ORDER
173 for(int n=0;n< 1000; n++){
174 if( Util_TryBindUpdAddr("127.0.0.1",n+_sconf.userlog_port) ){
175 _sconf.userlog_port+=n;
176 break;
177 }
178 }
179 MainLog(NVLog::LOG_DEBUG,"bind udp port :%d", _sconf.userlog_port);
180 if( _sconf.logwin_startup_show ){
181 ShowUserLogWindow(); //add on 05.10.13 scott
182 }
183 uw = new NVLog::UdpWriter("127.0.0.1",_sconf.userlog_port);
184 uw->Open();
185 _userlog.SetWriter(uw);
186 #endif
187 #endif
188
189 ret = OVwInit();
190 if( ret ){
191 MainLog(NVLog::LOG_ERROR,"system start error: OVwInit failed!");
192 return false;
193 }
194 LoadFlowVisObjectList();
195
196 #ifdef FLOWVIS_SHOW
197 //--清除進程號
198 FILE *fp ;
199 char buff[32];
200 unsigned int pid ;
201 Util_DelFile("./fvshow.pid");
202 Util_DelFile("./del.f");
203 //--創建進程號,并寫入進程文件
204 fp = fopen("./fvshow.pid","w");
205
206 #ifdef WIN32
207 pid = GetCurrentProcessId();
208 #else
209 pid = (unsigned int)getpid();
210 #endif
211 sprintf(buff,"%u",pid);
212 fwrite(buff,1,strlen(buff),fp);
213 fclose(fp);
214 #endif
215
216 #ifdef FLOWVIS_ORDER // -- to create fields
217 /*
218 OVwFieldId fid = OVwDbFieldNameToFieldId(OVW_FIELD_ISFLOWVIS_SET);
219 OVwDbDeleteField(fid);
220 fid = OVwDbCreateField(OVW_FIELD_ISFLOWVIS_SET, ovwBooleanField, ovwLocateField|ovwGeneralField);
221 if( fid == ovwNullFieldId){
222 if( OVwError() != OVw_FIELD_EXISTS){
223 MainLog(NVLog::LOG_ERROR,"創建Field :%s 失敗!",OVW_FIELD_ISFLOWVIS_SET);
224 }
225 }else{
226 MainLog(NVLog::LOG_ERROR,"創建Field :%s 成功!",OVW_FIELD_ISFLOWVIS_SET);
227 }*/
228 #endif
229 return true;
230 }
231
232
233 bool FlowVis::LoadTaskObject(const char * base,const char * file){
234 FILE * fp;
235 char * ret;
236 char * sep = "#";
237 char line[1024];
238 unsigned int objid;
239 char *tok;
240 fvObject *obj;
241 FVSTRING ip,index,ifspeed;
242 FVSTRING path;
243
244 path = base;
245 path = path+file;
246 MainLog(FVLOG::LOG_DEBUG," To LoadTaskObject %s/",path.c_str());
247 fp = fopen(path.c_str(),"r");
248 if(!fp){
249 return false;
250 }
251 objid = atoi(file);
252 if( objid == 0){
253 return false;
254 }
255
256 ret = fgets(line,sizeof(line),fp);
257 if(!ret){
258 return false;
259 }
260 MainLog(FVLOG::LOG_DEBUG,"Read Line:%s",line);
261 tok = strtok(line,sep);
262 if( tok ){
263 ip = tok;
264 tok = strtok(NULL,sep);
265 if( tok ){
266 index = tok;
267 obj = new fvObject;
268 obj->objid = objid;
269 obj->ip = ip;
270 obj->status = fvObject::CONFIRM;
271 obj->index = atol(index.c_str());
272 obj->subnet = CalcSubnet(obj->ip.c_str(),"");
273 _speedneed.push_back(obj);
274 MainLog(FVLOG::LOG_DEBUG,"加載任務對象:objid:%d,ip:%s,index:%u,subnet:%s",objid,ip.c_str(),obj->index,obj->subnet.c_str());
275 }
276 }
277 fclose(fp);
278 return true;
279 }
280 /*
281 name: LoadFlowVisObjectList
282 desc: flowvis啟動時,將設置過的對象從文件加載上來
283 <objectid#ip#index#speed>
284 param:
285 ret:
286 */
287 void FlowVis::LoadFlowVisObjectList(){
288 std::vector<FVSTRING> filist;
289 FVSTRING path;
290
291 std::vector<FVSTRING>::iterator itr;
292
293 fvObject_List::iterator itrobj;
294 fvObject * obj;
295 for(itrobj= _obj_list.begin();itrobj!=_obj_list.end();itrobj++){
296 obj = *itrobj;
297 delete obj;
298 }
299 _speedneed.erase(_speedneed.begin(),_speedneed.end());
300 Util_EnumFile(DIR_INTERFACE,filist);
301 for(itr = filist.begin();itr!=filist.end();itr++){
302 path = DIR_INTERFACE;
303 path = path + "/";
304 LoadTaskObject(path.c_str(),(*itr).c_str());
305 }
306
307 #ifdef FLOWVIS_ORDER
308 /*
309 OVwFieldId fid;
310 for(itrobj= _obj_list.begin();itrobj!=_obj_list.end();itrobj++){
311 obj = *itrobj;
312 fid= OVwDbFieldNameToFieldId(OVW_FIELD_ISFLOWVIS_SET);
313 OVwDbSetFieldBooleanValue(obj->objid,fid,TRUE);
314 }*/
315 #endif
316
317 }
318
319 void FlowVis::Clearup(){
320
321 }
322
323 void FlowVis::OnMapClose(void *userData, OVwEventType event){
324 FlowVis * f = (FlowVis*)userData;
325 MainLog(NVLog::LOG_MESSAGE,"OnMapClose ");
326
327 //-- restore sense
328 f->_sample_lock.Lock();
329 fvObject_List::iterator itr;
330 fvObject * obj;
331 // OVwFieldId fid;
332 for(itr = f->_sample_list.begin();itr!=f->_sample_list.end();itr++){
333 obj = *itr;
334 if( obj->status == fvObject::CONFIRM){
335 f->RestoreObjectBehavior(obj);
336 /*
337 fid= OVwDbFieldNameToFieldId(OVW_FIELD_ISFLOWVIS_SET);
338 OVwDbSetFieldBooleanValue(obj->objid,fid,FALSE);*/
339 }
340 }
341 f->_sample_lock.Unlock();
342 MainLog(NVLog::LOG_MESSAGE,"準備恢復符號初始狀態!");
343 OVwMapInfo * map;
344 map = OVwGetMapInfo();
345 OVwAckMapClose(map,time(0));
346 //FlowVis::SystemExit(userData,event);
347 }
348
349 void FlowVis::OnMapOpen(void *userData, OVwEventType event){
350 FlowVis * f = (FlowVis*)userData;
351 MainLog(NVLog::LOG_MESSAGE,"OnMapOpen");
352 static int _do =0;
353 if( !_do){
354 f->ShowLink();
355 }
356 }
357
358
359 void FlowVis::SystemExit(void *user, OVwEventType event,OVwBoolean normalEnd){
360 FlowVis * f = (FlowVis*)user;
361
362 MainLog(NVLog::LOG_MESSAGE,"On SystemExit,normalEnd:%d",normalEnd);
363 #ifdef FLOWVIS_ORDER
364 //-- to kill buddy : fvshow
365 //--清除進程號
366 /*
367 FILE *fp ;
368 char buff[32];
369 unsigned int pid;
370 fp = fopen("./fvshow.pid","r");
371 if(fp){
372 fgets(buff,sizeof(buff),fp);
373 pid = (unsigned int)atol(buff);
374 fclose(fp);
375 if( pid ){
376 f->KillProcess(pid);
377 }
378 }*/
379 Util_DelFile("./fvshow.pid");
380 #endif
381
382 MainLog(NVLog::LOG_MESSAGE,"已經恢復符號初始狀態! 系統退出");
383 //MainUserLog(NVLog::LOG_ERROR,"FLOWVIS::EXIT");
384 // OVwDone();
385 exit(0);
386 }
387
388 bool FlowVis::MainLoop(){
389 #ifdef FLOWVIS_SHOW
390 MrtgSampling();
391 #endif
392 #ifdef FLOWVIS_ORDER
393 OVwAddActionCallback((char *)("SetObject"), (OVwActionCallbackProc)SetObject, (void*)this);
394 OVwAddActionCallback((char *)("CancelObject"), (OVwActionCallbackProc)CancelObject, (void*)this);
395 OVwAddActionCallback((char *)("ShowReport"), (OVwActionCallbackProc)ShowReport, (void*)this);
396 OVwAddCallback(ovwMapClose, NULL,(OVwCallbackProc) FlowVis::OnMapClose,(void*)this);
397 #ifdef WIN32
398 OVwAddCallback(ovwEndSession, NULL,(OVwCallbackProc) FlowVis::SystemExit,(void*)this);
399 #endif
400 OVwMainLoop();
401 #ifdef _UNIX
402 FlowVis::SystemExit((void*)this,1,1);
403 #endif
404 MainLog(NVLog::LOG_DEBUG,"after OVwMainLoop()");
405 #endif
406
407 return true;
408 }
409
410 #define READ_SAMPLE_EXIT fclose(fp);return false;
411
412 bool FlowVis::ReadObjectInfo(fvObject* obj){
413 //j->
414 char buff[1024];
415 FILE * fp;
416 FVSTRING str;
417 char * ret;
418 sprintf(buff,"%s/%s_%u",MRTG_DIR_OUTPUT,obj->ip.c_str(),obj->index);
419 unsigned int out,in;
420 float outr,inr;
421 MainLog(NVLog::LOG_DEBUG,"ReadObjectInfo::試圖讀取 %s",buff);
422 fp = fopen(buff,"r");
423 if( !fp ){
424 MainLog(NVLog::LOG_DEBUG,"試圖讀取MRTG數據失敗，文件打開失敗%s",buff);
425 return false;
426 }
427 ret = fgets(buff,sizeof(buff),fp); // -- out bytes;
428 if(!ret){
429 READ_SAMPLE_EXIT
430 }
431 str = ValidString(buff);
432 out = atol(str.c_str());
433 //--
434 ret = fgets(buff,sizeof(buff),fp); // -- out bytes;
435 if(!ret){
436 MainLog(NVLog::LOG_DEBUG,"試圖讀取MRTG數據失敗，數據可能未采集!");
437 READ_SAMPLE_EXIT
438 }
439 str = ValidString(buff);
440 in = atol(str.c_str());
441 //--
442 ret = fgets(buff,sizeof(buff),fp); // -- out bytes;
443 if(!ret){
444 READ_SAMPLE_EXIT
445 }
446 str = ValidString(buff);
447 outr = atof(str.c_str());
448 //--
449 ret = fgets(buff,sizeof(buff),fp); // -- out bytes;
450 if(!ret){
451 READ_SAMPLE_EXIT
452 }
453 str = ValidString(buff);
454 inr = atof(str.c_str());
455 // -- end read
456 fclose(fp);
457 //--
458 MainLog(NVLog::LOG_DEBUG,"讀取MRTG數據成功!");
459 obj->flow_val = in + out;
460 obj->using_rate = inr+outr;
461 MainLog(NVLog::LOG_DEBUG,"讀取MRTG數據成功 obj->flow_val:%d,obj->using_rate:%f",obj->flow_val,obj->using_rate);
462 return true;
463 }
464
465 /*
466 MRTG采集數據的顯示
467 */
468 void FlowVis::ShowLink(){
469 fvObject_List::iterator itr;
470 _sample_lock.Lock();
471 for(itr = _sample_list.begin();itr!=_sample_list.end();itr++){
472 fvObject *obj;
473 obj = *itr;
474 if( obj->status == fvObject::PENDING){
475 continue;
476 }
477 #ifdef _UNIX
478 #ifdef FLOWVIS_SHOW
479 FILE * fp ;
480 fp = fopen("./del.f","r");
481 if( fp ){
482 fclose(fp);
483 Util_DelFile("./del.f");
484 MainLog(NVLog::LOG_DEBUG,"監測到對象被取消設置,停止顯示對象信息");
485 break;
486 }
487 #endif
488 #endif
489 if( !_sconf.rtParam.enable ){ // current flowvis is disabled
490 RestoreObjectBehavior(obj); // 還原符號原有的信息
491 continue;
492 }
493 if( ReadObjectInfo(obj)){
494 //-- format string
495 char buff[1024];
496 if( _sconf.rtParam.show_type == 1){ // using_rate
497 if(obj->flow_val<1000){ //^^2005.09.19 scott
498 sprintf(buff,REPRESENT_FORMAT_FLOW_RATE,obj->flow_val);
499 }else{
500 sprintf(buff,REPRESENT_FORMAT_FLOW_RATE_KB,obj->flow_val/1000);
501 }
502 }else{
503 sprintf(buff,REPRESENT_FORMAT_USING_RATE,obj->using_rate);
504 }
505 obj->text = buff;
506 MainLog(NVLog::LOG_MESSAGE,"讀取采樣數據:%d,%f,Text:%s",obj->flow_val,obj->using_rate,buff);
507
508 if( _sconf.rtParam.show_type == 1 ) { // 流速
509 CalcSymbolWidth(obj->flow_val,obj->symbol_type);
510 MainLog(NVLog::LOG_DEBUG," after CalcSymbolWidth ,current:%d,symbol_type:%s",obj->flow_val,obj->symbol_type.c_str());
511 }else{
512 CalcSymbolWidthByPercent(obj->using_rate,obj->symbol_type);
513 MainLog(NVLog::LOG_DEBUG," after CalcSymbolWidthByPercent ,percent:%f,symbol_type:%s",obj->using_rate,obj->symbol_type.c_str());
514 }
515 }else{
516 obj->text = TEXT_MRTG_PREPARE;
517 obj->symbol_type = "Connection:Generic";
518 }
519 RepresentObjectBehavior(obj);
520 }
521 _sample_lock.Unlock();
522 }
523
524 void FlowVis::MrtgSampling(){
525 while(1){
526 ShowLink();
527 for(int n=0;n< _sconf.showlink_interval ;n++){
528 if( n==30){
529 ReloadConfig();
530 }
531 SLEEP_SEC(1);
532
533 OVwMapInfo *map=OVwGetMapInfo();
534 //MainLog(NVLog::LOG_DEBUG,"to OVwGetMapInfo()!");
535 if( !map){
536 MainLog(NVLog::LOG_DEBUG,"OVwGetMapInfo failed,fvshow will exit!");
537 if( OVwError() == OVw_CONNECTION_LOST){
538 exit(1);
539 }
540 }else{
541 OVwFreeMapInfo(map);
542 }
543
544 }
545 LoadFlowVisObjectList(); // -- n 時間之后重新加載鏈路信息
546 }
547 //MainLog(NVLog::LOG_MESSAGE,"ThreadMrtgSample exit");
548 }
549
550 //-- save object list to interface.list
551 // objectid#ip#index#subnet
552 bool FlowVis::SaveObjectList2File(){
553 char buff[1024];
554 FILE * fp;
555 fvObject_List::iterator itr;
556 fvObject * obj;
557 MainLog(FVLOG::LOG_MESSAGE,"對象將被記錄interface");
558 return true;
559 fp = fopen(FILE_INTERFACE,"w");
560
561 _obj_lock.Lock();
562 for( itr = _obj_list.begin();itr!=_obj_list.end();itr++){
563 obj = *itr;
564 sprintf(buff,"%u#%s#%d#%s\n",obj->objid,obj->ip.c_str(),obj->index,obj->subnet.c_str());
565 fputs(buff,fp);
566 MainLog(FVLOG::LOG_MESSAGE,"對象已被記錄到interface.list: %s",buff);
567 }
568 _obj_lock.Unlock();
569 fclose(fp);
570 return true;
571 }
572
573 bool FlowVis::MrtgPrepare(fvObject * obj){
574 //- to mrtg processs
575 ShowUserLogWindow();
576 MainUserLog(FVLOG::LOG_DEBUG,"鏈路[%s]正在設置",Util_GetOVwSelectionName(obj->objid).c_str());
577 if(SaveTask("",obj)){
578 obj->text = TEXT_MRTG_PREPARE;
579 MainLog(FVLOG::LOG_DEBUG,"to representobjectBehavior() after savetask");
580 RepresentObjectBehavior(obj);
581 obj->status = fvObject::CONFIRM; //switch status
582 MainLog(FVLOG::LOG_DEBUG,"啟動MRTG采集成功 ip:%s,index:%d",obj->ip.c_str(),obj->index);
583 MainUserLog(FVLOG::LOG_DEBUG,"鏈路[%s]設置完畢",Util_GetOVwSelectionName(obj->objid).c_str());
584 }else{
585 MainLog(FVLOG::LOG_ERROR,"啟動MRTG采集失敗 ip:%s,index:%d",obj->ip.c_str(),obj->index);
586 MainUserLog(FVLOG::LOG_ERROR,"鏈路[%s]設置失敗，"
587 "原因可能是鏈路所在的設備Community不正確或設備無法訪問"
588 "，及鏈路的屬性不符合設置條件",Util_GetOVwSelectionName(obj->objid).c_str());
589 delete obj;
590 return false;
591 }//-- end if
592 _obj_lock.Lock();
593 _obj_list.push_back(obj); // -- sucess task executed will be pushed into queue
594 _obj_lock.Unlock();
595 return true;
596 //MainLog(NVLog::LOG_MESSAGE,"Thread Ifspeed exit");
597 }
598
599
600
601 bool FlowVis::CheckEnvironment(){
602 // 檢測 if,mc,mrtg,flowvis.t,flowvis.conf
603 FILE * fp;
604 if( (fp=fopen(CONFILE,"r")) == NULL ){
605 MainLog(NVLog::LOG_ERROR,"flowvis.conf missed");
606 return false;
607 }
608 fclose(fp);
609 if( NULL == (fp = fopen(MRTG_FILE_CFG_TEMPLATE,"r"))){
610 MainLog(NVLog::LOG_ERROR,"flowvis.t missed");
611 return false;
612 }
613 fclose(fp);
614 Util_MkDir(DIR_INTERFACE);
615 Util_MkDir(MRTG_DIR_WORK);
616
617 return true;
618 }
619
620
621 void FlowVis::SetMRTGInfo(){
622 MRTG.cfgmake = MRTG_FILE_CFGMAKER ;
623 MRTG.cfgT = MRTG_FILE_CFG_TEMPLATE;
624 MRTG.mrtg = MRTG_FILE_MAINAPP;
625 MRTG.perl = PERL_APP;
626 MRTG.workdir = MRTG_DIR_WORK;
627 MRTG.java = JAVA_APP;
628 }
629
630
631
632
633 bool FlowVis::CalcSymbolWidth(unsigned int v,std::string &connection){
634 double sensitive;
635 long tempUint;
636 char buff[128];
637
638 sensitive = _sconf.rtParam.link_sensitive;
639
640 #ifdef _HPUX
641 tempUint=(long)((logf(v)/logf(sensitive))*2.0-3);
642 #else
643 tempUint=(long)((log(v)/log(sensitive))*2.0-3);
644 #endif
645 if(tempUint==0||tempUint<0){
646 connection = "SCarrier:S1Carrier";
647 }else if(tempUint>40){
648 connection = "SCarrier:S40Carrier";
649 }else{
650 sprintf(buff,"SCarrier:S%dCarrier",tempUint);
651 connection = buff;
652 }
653 MainLog(NVLog::LOG_DEBUG,"CalcSymbolWidth() 流量:%d,靈敏度:%f,計算結果:%d",v,sensitive,tempUint);
654 return true;
655 }
656
657
658 bool FlowVis::CalcSymbolWidthByPercent(float percent,std::string & connection){
659 unsigned int ret;
660 ret = (unsigned int)(percent*0.4);
661 ret = ret ==0 ? 1 : ret;
662 ret = ret >40? 40 :ret;
663 char buff[128];
664 sprintf(buff,"SCarrier:S%dCarrier",ret);
665 connection = buff;
666 MainLog(NVLog::LOG_DEBUG,"CalcSymbolWidth() 流量percent:%f,計算結果:%d",percent,ret);
667 return true;
668 }
669
670 void FlowVis::GetCommunity(const char *IP,FVSTRING &Community)
671 {
672 #ifdef FLOWVIS
673 //根據IP地址取出Community
674 OVsnmpConfDest *Dest;
675 OVsnmpConfOpen(SNMP_CONF_OPEN_RDONLY);
676 Dest=OVsnmpConfResolveDest(IP,SNMP_CONF_FORCE_RESOLVE);
677 if(Dest){
678 Community = Dest->confEntry->community;
679 OVsnmpConfFreeDest( Dest);
680 }
681 #endif
682 }
683
684
685
1
2
3
4 #include <string.h>
5 #include <stdlib.h>
6 #include <sys/types.h>
7 #include <OV/ov_types.h>
8 #include <fcntl.h>
9 #include <stdio.h>
10 #include <signal.h>
11 #include <time.h>
12 #include <errno.h>
13
14
15
16 #ifdef _UNIX
17 #include <unistd.h>
18 #endif
19
20 #ifdef WIN32
21 #include <winsock.h>
22 #pragma comment(lib,"ws2_32.lib")
23 typedef unsigned short mode_t;
24 #endif
25
26 #include <OV/OVsPMD.h>
27 #include <OVPath.h>
28
29
30 int ovspmdSocket = -1;
31 fd_set rdmask; /* read mask for select */
32 OVsCodeType code; /* response code for OVsResponse */
33 OVsPMDCommand ovspmdCommand;
34
35 bool spmd_init(){
36 if (OVsInit(&ovspmdSocket) < 0){
37 return false;
38 }
39 code = OVS_RSP_SUCCESS;
40 if (OVsInitComplete(code, "Initialization complete!") < 0){
41 return false;
42 }
43 return true;
44 }
45
46
47 void spmd_process(){
48 int selectRC;
49 for (;;){
50 FD_ZERO(&rdmask);
51 FD_SET(ovspmdSocket, &rdmask);
52 selectRC = select(ovspmdSocket + 1, (fd_set *)&rdmask,0,0,0);
53 if (selectRC <= 0 ){
54 break;
55 }
56 if (FD_ISSET(ovspmdSocket, &rdmask)){
57 if (OVsReceive(&ovspmdCommand) < 0){
58 // 致命錯誤
59 break;
60 }
61 switch (ovspmdCommand.code){
62 case OVS_CMD_EXIT:
63 goto __exit;
64 case OVS_CMD_NOOP:
65 case OVS_CMD_PAUSE:
66 case OVS_CMD_RESUME:
67 // send NACK back to ovspmd
68 //code = OVS_RSP_RESUME_NACK;
69 if (OVsResponse(code, "ignore message") < 0){
70 break;
71 }
72 break;
73 default:
74 break;
75 }
76 }
77 }
78 __exit:
79 OVsDone("flowvis loader exit");
80 // rplog->Print(1,"PMD Command Exit!");
81 }
82
83
84
85
86
|