proxmox ve 2.2 elastix2.3模板制作

安裝好proxmox ve 2.2
ssh 到 proxmox ve

apt-get -y update
apt-get -y makedev
apt-get -y install build-essential make pve-headers-`uname -r`
cd /usr/src/
wget http://downloads.digium.com/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
tar zxfv dahdi-linux-complete-current.tar.gz
cd dahdi-linux-complete-*
make all
make install
make config
mkdir /etc/asterisk
service dahdi start
dahdi_genconf
vi /etc/dahdi/modules 全部加#號注釋

sed -i 's|ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length|ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp|' /etc/vz/vz.conf
/etc/init.d/vz restart

//禁用ipv6
/boot/grub/grub.cfg 中 linux   /vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro  quiet 替換成 linux   /vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro  ipv6.disable=1 quiet


在elastix2.3機器上 參考 http://wiki.openvz.org/Creating_a_CentOS_5.0_Template

First, create a file called /tmp/exclude and add the following lines to it:

.bash_history

lost+found

/dev/*

/mnt/*

/tmp/*

/proc/*

/sys/*

/usr/src/*

 tar --numeric-owner -czvf /tmp/centos-5.7-x86_64-elasitx_orig-image.tar.gz -X /tmp/exclude /

1. where <ARCH> represents the system architecture (i386 or
2. x86_64) and <DISTRO> represents the distribution (default, minimal, etc.).

scp /tmp/centos-5.7-x86_64-elasitx_orig-image.tar.gz root@ip:/var/lib/vz/template/iso

回到proxmox ve 機器 使用 web以centos-5.7-x86_64-elasitx_orig-image 為模板創建vt虛擬機  假設 vm id 為 100
ssh 到 proxmox ve
cd /var/lib/vz/private/100
Edit the etc/inittab file and comment out the lines that respawn /sbin/mingetty on tty1 through tty6. Just put a # at the beginning of the line.

在 etc/inittab 文件最后面加入
1:2345:respawn:/sbin/agetty tty1 38400 linux

Remove the etc/mtab file and then create a symbolic link by typing ln -s /proc/mounts etc/mtab
Remove all of the lines from etc/fstab except for the line that mounts /dev/pts
Edit etc/rc.d/rc.sysinit and comment out the line that starts /sbin/start_udev by placing a # at the beginning of the line.

mknod dev/ptmx c 5 2
mkdir dev/pts

cd dev
/sbin/MAKEDEV ttyp ptyp
cd ../

mknod dev/null c 1 3

mknod -m 644 dev/random c 1 8

mknod dev/urandom c 1 9
mknod dev/tty9 c 4 9

Create the var/lock/rpm folder.

Edit etc/sysconfig/network and set NETWORKING_IPV6 to no.
Add the following lines to etc/modprobe.d/blacklist.conf:
blacklist ipv6

blacklist net-pf-10
 

Disable any physical NICs by modifying the etc/sysconfig/network-scripts/ifcfg-ethX files (where X is the interface number starting from 0) and setting ONBOOT to no.

Check etc/sysconfig/init to see if PROMPT=yes, and then change to no. Otherwise when startup init script rc will enter interactive mode and wait there forever

 

vzctl set 100 --devnodes dahdi/pseudo:rw --save
vzctl start 100
vzctl enter 100
chkconfig haldaemon off
chkconfig dahdi off
chkconfig wanrouter off

rm -rf /etc/init.d/dahdi
rm -rf /etc/init.d/wanrouter

chkconfig acpid off
chkconfig kudzu off

chkconfig xfs off
chkconfig rpcidmapd off
chkconfig rpcgssd off
chkconfig nfslock off
chkconfig mdmonitor off
chkconfig ip6tables off

exit
cd /var/lib/vz/private/100
tar -czvf /var/lib/vz/template/cache/centos-5-x86_64-elasitx.tar.gz ./






 

posted on 2012-11-06 16:59 八葉草 閱讀(1487) 評論(0)  編輯 收藏 引用 所屬分類: asterisk